Filter Nozzle That Can Be Used For Both Liquid And Solid Gases

The wedge wire element in a nozzle is a screen pipe. Nozzles are closed on one side and have a threaded fitting on the other. The flow is always out to in. Standard nozzles are listed following.

Send email to us

Product Detail

Product Tags

Construction

No.	Model	Slot (in mm)	Outside dimension
No.	Model	Slot (in mm)	D	H	L	M
1	RYS45-1 -A	0.15-0.3	45	25	90	25
2	RYS45-1-B	0.15-0.3	45	35	100	25
3	RYS45-1-C	0.15-0.3	45	45	110	25
4	RYS53-2-A	0.15-0.3	53	35	100	25
5	RYS53-2-B	0.15-0.3	53	45	110	25
6	RYS53-2-C	0.15-0.3	53	55	120	32
7	RYS57-3-A	0.15-0.3	57	35	100	32
8	RYS57-3-B	0.15-0.3	57	45	110	32
9	RYS57-3-C	0.15-0.3	57	55	120	32
10	RYS70-4-A	0.15-0.3	70	45	105	32
11	RYS70-4-B	0.15-0.3	70	55	115	32

Remark:
1. One rubber shim for a nozzle; one steel shim and two thin nuts of the same material.
2. The dimensions not available in table can also be offered based on customers requirements.
Example: D82H50L115M42 3S0. 25.
Material: SUS304 lCrl8Ni9Ti 316 316L 904L Haynes alloy C.

Principle of operation

RunZe@ nozzles can be used for liquid/solid or gas/solid separation, or media retention (sand, catalyst, resin......). The nozzles are mounted on a support plate. The dimensions and the distribution of the nozzles on the support plate can be altered to obtain an optimized flow distribution.

Application

Above mentioned designs are used widely in down-flow reactors for liquid/solid or gas/solid separation. The liquid or gas can flow through the nozzles while the solids are retained in the vessel by the nozzles.